The main raw material for fruit wood chippers is fruit trees, apple twigs, grape twigs, pear twigs, these short and not too large branches and trees. Fruit slicer is mainly suitable for small diameter wood, wood harvesting, processing residues (such as branches, branches, slabs, slats, round wood cores, waste veneer, waste wood, etc.), and can also be used to cut non-wood raw materials (such as sugar cane , Reed, bamboo, etc.). After the raw material is cut, it becomes a small piece of wood with a certain specification. It can be used as raw material for various papermaking manufacturers such as particleboard, medium density board, fiberboard, and can also be used as fuel. Simple and convenient operation and high production efficiency.
The wood is fed from the feed port. When the wood contacts the cutting blade, it follows the high-speed rotation of the cutting blade to cut. The cut wood chips are produced in the cutting room by the blades on the cutting blade. High-speed steam flow is sent out.
1. The fruit wood chipper uses low-voltage or high-voltage motors. Large disc wood chippers have two types of belt drive and direct drive; the feed is divided into horizontal and tilting methods, and there are upper and lower discharge. Two ways.
2. The fruit wood chipper has a compact structure, reasonable layout, easy installation, convenient operation and maintenance, and high production capacity. When cutting logs, the quality of the wood chips is high, and the length of the wood chips can be freely adjusted within the specified range. It is an advanced wood chipping machine in China. machine.
3. The output of fruit chippers is 2 ~ 160 cubic meters per hour. Users can choose the model according to their needs.
Scope of application: Suitable for paper mills, particle board mills, fiber board mills and wood chip production and export bases. Logs, small-diameter logs, etc. can be cut into high-quality industrial wood chips with uniform length, flat cuts, and uniform thickness. It can also cut branches and sapwood and boards.
Structural composition: The fruit wood chipper is composed of a body, a knife roller, an up-and-down feeding mechanism, a feeding device, a hydraulic system and the like. Its base is welded with high-strength steel plates, which is the supporting base of the entire drum chipper. Two flying knives are installed on the knife roller, and the specially manufactured flying knife bolts are used to fix the flying knife on the pressure block. On the knife roll; according to the different thickness of the raw material being cut, the upper feeding roller assembly can float up and down within a certain range by means of the hydraulic system; the cut qualified piece of material falls through the mesh screen hole and is discharged from the bottom. The large piece of material will Cut again in the machine.
|Knife roller diameter (mm)||300||650||800||800||1300||2000|
|Number of flying knives||2||2||2||2||2||3 * 2|
|Feed opening size (mm)||120 * 300|| 180 * 500 ||225 * 680||240 * 750||400 * 700||850 * 1250|
|Knife roller speed (rpm)||730||590/836||650||650||500||295|
|Feeding speed (m / min)||38||37||37/25||31||38||31|
|Large diameter of processing material (mm)||90||120||160||160||230||370|
|Wood chip length (mm)||26||30/22||30/20||30||38||35|
|Power of main motor (kw)||30||55||110||132||200-250||800-1000|
|Motor power of feeding roller (kw)||1.1 * 2||3 * 2||4 * 2||4 * 2||7.5 * 2||22 * 2|
|Oil pump motor power (kw)||1.1||/||/||0.55||3||3|
|Overall dimensions (mm)||3680 * 870 * 900||4348 * 1730 * 1258||4670 * 2150 * 1500||4600 * 2150 * 1500||3670 * 2517 * 2050||7970 * 7150 * 2750|
The main feature of diesel drum chipper cutting is to drive the whole with diesel ...
Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred ...
Metal shredder is divided into two shafts metal shredder, single shaft metal shredder, gold ...