Drum slicer series products are special equipment for processing wood chips. This product is widely used in particle board factory, medium and high density fiberboard factory, straw factory, bio power plant, wood chip factory and other industries and companies. device.
The wood is fed from the feed port. When the wood contacts the cutting blade, it follows the high-speed rotation of the cutting blade to cut. The cut wood chips are produced in the cutting room by the blades on the cutting blade. High-speed steam flow is sent out.
1. Drum slicer has advanced structure, high quality of cutting material, wide adaptability of raw materials, convenient operation and maintenance. The machine is composed of machine base, knife roller, upper and lower feeding roller, conveyor belt, hydraulic system and other parts.
2. The base of the drum slicer is welded with high-cavity steel plates, which is the supporting foundation of the entire machine; two flying knives are installed on the knife roller, and the specially manufactured flying knife bolts are used to fix the flying knife on the pressure block. On the knife roll; according to the different thickness of the material being cut, the upper feeding roller assembly can float up and down within a certain range by means of the hydraulic system; the cut qualified sheet material falls through the mesh screen hole, and there is a bottom row, a large sheet material It will be cut again in the machine.
3. Drum slicer hydraulic system: The oil is supplied from the hand pump to the oil cylinder, and the cover can be started to facilitate the replacement of the blade. During maintenance, the upper feeding roller assembly can be raised to adjust the gap between the flying knife and the bottom knife. Removal and assembly of combs.
The drum slicer is composed of a body, a knife roller, an upper and lower feeding roller, a conveyor belt, and a hydraulic system. The body is welded with high-strength steel plates, which is the supporting foundation of the entire machine. Two or three or four flying knives are installed on the knife roller, and the special flying knife bolt is used to fix the flying knife on the knife roller through the pressure block. Depending on the thickness of the material being cut, the upper feed roller assembly can float up and down within a certain range by means of a hydraulic system. The cut qualified pieces fall through the screen holes and are discharged from the bottom. Large pieces will be cut in the machine.
|Knife roller diameter (mm)||300||650||800||800||1300||2000|
| Number of flying knives ||2||2||2||2||2||3 * 2|
|Feed opening size (mm)||120 * 300|| 180 * 500 ||225 * 680||240 * 750||400 * 700||850 * 1250|
|Knife roller speed (rpm)||730||590/836||650||650||500||295|
|Feeding speed (m / min)||38||37||37/25||31||38||31|
|Large diameter of processing material (mm)||90||120||160||160||230||370|
|Wood chip length (mm)||26||30/22||30/20||30||38||35|
|Power of main motor (kw)||30||55||110||132||200-250||800-1000|
|Motor power of feeding roller (kw)||1.1 * 2||3 * 2||4 * 2||4 * 2||7.5 * 2||22 * 2|
|Oil pump motor power (kw)||1.1||/||/||0.55||3||3|
|Overall dimensions (mm)||3680 * 870 * 900||4348 * 1730 * 1258||4670 * 2150 * 1500||4670 * 2150 * 1500||3670 * 2517 * 2050||7970 * 7150 * 2750|
The main feature of diesel drum chipper cutting is to drive the whole with diesel ...
Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred ...
Metal shredder is divided into two shafts metal shredder, single shaft metal shredder, gold ...