抢庄三张

Welcome to the official website of Zhengzhou Pengrui Machinery Equipment Co., Ltd.!
ZHENGZHOUPENGRUIJIXIE SHEBEIYOUXIANGONGSI Zhengzhou Pengrui Machinery Equipment Co., Ltd. ZHENGZHOUPENGRUIJIXIE SHEBEIYOUXIANGONGSI
leading product:

New wood shredder chipper

Drum Chipper Product
  • Mushroom tree chipper
  • Mushroom tree chipper
  • Mushroom tree chipper
  • Mushroom tree chipper
Loading ...

Mushroom tree chipper

  • 鼓式削片机 Category: Drum Chipper
  • PR216-218 Specifications: PR216-218
  • 55-90kw Motor power: 55-90kw
  • 3-80mm Output granularity: 3-80mm

Effect map

  • Mushroom tree chipper
  • Mushroom tree chipper
  • Mushroom tree chipper
Detailed description

The main raw materials for cutting wood mushroom chippers are small-diameter wood, wood harvesting, and processing residues (such as branches, branches, slabs, slats, round wood cores, waste veneer, waste wood, etc.). Wood materials (such as sugar cane, reed, moso bamboo, etc.). After the raw material is cut, it becomes a small piece of wood with a certain specification. It can be used as a raw material for various papermaking lines such as particleboard, medium density board, and fiberboard, and can also be used as fuel. Wide range of applications, diversified raw materials, good quality wood chips, safe and reliable, simple and convenient operation, high production efficiency.

The wood is fed from the feed port. When the wood touches the cutting blade, it follows the high-speed rotation of the cutting blade to cut. The cut wood chips are produced in the cutting room by the blades on the cutting blade. High-speed steam flow.

1. The chipping machine's alloy cutters are sharp, wear-resistant, reliable and advanced, and have a unique crushing system design that greatly increases the service life of the equipment. The crushing chamber adopts multiple crushing processes and fine crushing principle devices, which are characterized by large working impact force, high production efficiency and strong fine crushing ability.
2. The chipper consumes less consumable parts, and the running cost is low. The structure is reasonable, the crushing principle and technology are advanced, the operation is reliable, and the running cost is low; all parts of the crusher are protected against wear, which reduces maintenance costs to a minimum, and the general service life can be increased by more than 30%.
3. The main body of the chipper dust collector is a box. The lower part of the box is provided with a gray door. The box must be installed in a vertical frame. The upper body of the vertical frame is covered with filter bags, and the dust collector receives the dust-containing gas from the centrifugal separator. Enter the cabinet from the cabinet entrance and discharge into the outer space through the filter bag. Because the dust removal efficiency of the filter bag dust collector can reach more than 97%. Therefore, it has no pollution to the working environment. When the filter resistance of the dust collector will increase, you can choose to stop the machine at this time and perform manual cleaning during the rest time. When cleaning the dust collection of the filter bag, you can shake the filter bag by hand for dozens of seconds, so that the dust stuck to the inner surface of the filter bag can be shaken down, and the shaken dust can be directly discharged into the dust bag through the gray door of the box, and then Clear. Environmental protection, no pollution.

Mushroom tree chipper is a new type of chipper produced by our company. It is suitable for particleboard, medium density board, wood fiber board, papermaking, power plant, boiler and other industries. This product has an advanced structure, high quality cutting chips, wide adaptability of raw materials, and convenient operation and maintenance.








model RD-213 RD-216 RD-218 RDE-218D RD-2113 RD-2120
Knife roller diameter (mm) 300 650 800 800 1300 2000
Number of flying knives 2 2 2 2 2 3 * 2
Feed opening size (mm)
120 * 300 180 * 500 225 * 680 240 * 750 400 * 700 850 * 1250
Knife roller speed (rpm) 730 590/836 650 650 500 295
Feeding speed (m / min) 38 37 37/25 31 38 31
Large diameter of processing material (mm) 90 120 160 160 230 370
Wood chip length (mm) 26 30/22 30/20 30 38 35
Production capacity 3-5 10 15-20 38 36-64 190
Power of main motor (kw) 30
55 110 132 200-250 800-1000
Motor power of feeding roller (kw) 1.1 * 2 3 * 2 4 * 2 4 * 2 7.5 * 2 22 * 2
Oil pump motor power (kw) 1.1 / / 0.55 3 3
Weight (kg) 1200 4070 7000 7500 11840 55000
Overall dimensions (mm) 3680 * 870 * 900 4348 * 1730 * 1258 4670 * 2150 * 1500
4670 * 2150 * 1500 3670 * 2517 * 2050 7970 * 7150 * 2750

Page copyright note
The copyright of this article belongs to Peng Rui Machinery ; this article has been viewed 987 times.
Without authorization, any site is prohibited from mirroring, collecting, or duplicating the content of this site, and offenders have been defending rights through legal channels to the end!
Related cases
Diesel Drum Chipper

Diesel Drum Chipper

The main feature of diesel drum chipper cutting is to drive the whole with diesel ...

Plastic Shredder

Plastic Shredder

Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred ...

Metal shredder

Metal shredder

Metal shredder is divided into two shafts metal shredder, single shaft metal shredder, gold ...

Scrap steel shredder

Scrap steel shredder

The scrap steel shredder equipment adopts channel steel I-beam steel frame structure, without foundation, ...

a