The main raw materials for diesel drum chippers are small-diameter wood, wood harvesting, processing residues (such as branches, branches, slabs, slats, log cores, waste veneer, waste wood, etc.) and non-wood raw materials (such Sugarcane, reed, bamboo, etc.). After the raw material is cut, it becomes a small piece of wood with a certain specification. It can be used as a raw material for various papermaking lines such as particleboard, medium density board, and fiberboard, and can also be used as fuel. It has a wide range of applications, diversified raw materials, good quality wood chips, safety and reliability, simple and convenient operation, convenient maintenance and high production efficiency.
Working principle: The wood is fed from the feed port. When the wood contacts the cutting blade of the drum chipper, it follows the high-speed rotation of the cutting blade to cut. The cut wood is cut by the cutting in the cutting room. The high-speed steam generated by the blades on the cutter head is sent out.
The drum chipper adopts the integrated assembly technology of the main machine and the self-discharging system and the main machine and the main motor base, so the production of the main machine base and the main motor base is eliminated. At the end of this high price, you can save a lot of funds for the foundation without making foundations. Due to the different models, it can reduce your funds by several thousands to tens of thousands. And there is a good advantage is that once the machine is in place, it can be installed and put into production as soon as it has been debugged for a day or two, saving you a lot of time. At the same time, because there is no foundation limitation, the installation and commissioning of the drum chipper is very simple. At the same time it has two discharge devices, users can change the direction of the discharge according to demand and flexibly grasp the use. And the work place can be changed at will, convenient and simple!
It is suitable for cutting logs of less than 200mm, small diameter wood and branches of trees for slicing. Suitable for some paper mills, particle board mills and fiberboard mills, etc.
It is mainly composed of the main unit of the chipper, the coupling, the chassis, the motor, the base, the cutter head, the feeding port, the cover, and the electronic control system. Mouth and discharge port and other parts.
|Knife roller diameter (mm)||300||650||800||800||1300||2000|
|Number of flying knives||2||2||2||2||2||3 * 2|
|Feed opening size (mm)||120 * 300||180 * 500||225 * 680||240 * 750||400 * 700||850 * 1250|
|Knife roller speed (rpm)||730||590/836||650||650||500||295|
|Feeding speed (m / min)||38||37||37/25||31||38||31|
|Large diameter of processing material (mm)||90||120||160||160||230||370|
|Wood chip length (mm)||26||30/22||30/20||30||38||35|
|Production capacity|| 3-5 ||10||15-20||38||36-64||190|
|Power of main motor (kw)||30||55||110||132||200-250||800-1000|
| Motor power of feeding roller (kw) ||1.1 * 2||3 * 2||4 * 2||4 * 2||7.5 * 2|| 22 * 2 |
|Oil pump motor power (kw)||1.1||/||/||0.55||3||3|
|Weight (kg)|| 1200 ||4070||7000||7500||11840||55000|
|Overall dimensions (mm)||3680 * 870 * 900||4348 * 1730 * 1258||4670 * 2150 * 1500||4670 * 2150 * 1500||3670 * 2517 * 2050||7970 * 7150 * 2750|
The main feature of diesel drum chipper cutting is to drive the whole with diesel ...
Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred ...
Metal shredder is divided into two shafts metal shredder, single shaft metal shredder, gold ...