216 foundation-free drum slicer series products are special equipment for the production of wood chips. This product is widely used in particleboard factory, medium and high density fiberboard factory, straw factory, biological power plant, wood chip factory and other industries and manufacturers. The preferred equipment before the material preparation section. This product has advanced structure, high quality of cutting material, adaptable raw materials, and convenient operation and maintenance.
The wood is fed from the feed port. When the wood contacts the cutting blade of the drum chipper, it is cut with the high-speed rotation of the cutting blade, and the cut wood chip is placed on the cutting blade in the cutting room. The high-speed steam generated by the wind blade is sent out.
1. 216 foundation-free drum slicer has advanced structure, high quality of cutting material, wide adaptability of raw materials, convenient operation and maintenance. The machine is composed of machine base, knife roller, upper and lower feeding roller, conveyor belt, hydraulic system and other parts.
2. The 216 foundation-free drum slicer machine base is welded with high-cavity steel plates, which is the supporting foundation of the entire machine; two flying knives are installed on the knife roller, and the specially-made flying knife bolts are used to pass the flying block through the pressure block. The knife is fixed on the knife roller; according to the different thickness of the material being cut, the upper feeding roller assembly can float up and down within a certain range by the hydraulic system; the cut qualified piece of material falls through the mesh screen hole, and has a bottom row. The chips will be cut in the machine.
3.216 hydraulic system of basic drum slicer: from the hand oil pump to the oil cylinder, the cover can be started to facilitate the replacement of the blade, and the upper feeding roller assembly can be raised during maintenance to facilitate the adjustment of the flying knife and bottom Clearance of the knife and disassembly of the comb.
The main raw materials for cutting are small-diameter wood, timber harvesting, processing residues (such as branches, branches, slabs, slats, round wood cores, waste veneers, etc.), and also can be used to cut non-wood raw materials (such as sugar cane, reeds, moso bamboo) Wait).
| Knife roller diameter (mm) || 300 ||650||800||800||1300||2000|
|Number of flying knives||2||2||2||2||2||3 * 2|
|Feed opening size (mm)||120 * 300|| 180 * 500 ||225 * 680||240 * 750||400 * 700||850 * 1250|
|Knife roller speed (rpm)||730||590/836||650||650||500||295|
|Feeding speed (m / min)||38||37||37/25||31||38||31|
|Large diameter of processing material (mm)||90||120||160||160||230||370|
|Wood chip length (mm)||26||30/22||30/20||30||38||35|
|Power of main motor (kw)||30||55||110||132|| 200-250 ||800-1000|
|Motor power of feeding roller (kw)||1.1 * 2||3 * 2||4 * 2||4 * 2||7.5 * 2||22 * 2|
|Oil pump motor power (kw)||1.1|| / ||/||0.55|| 3 ||3|
|Overall dimensions (mm)||3680 * 870 * 900||4348 * 7130 * 1258||4670 * 2150 * 1500||*2150*1500 4670 * 2150 * 1500||3670 * 2517 * 2050||7970 * 7150 * 2750|
The main feature of diesel drum chipper cutting is to drive the whole with diesel ...
Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred ...
Metal shredder is divided into two shafts metal shredder, single shaft metal shredder, gold ...