The metal shredder is divided into a double-shaft metal shredder, a single-shaft metal shredder, and the main function of the metal shredder is to shred large pieces of metal materials and large-diameter barrel metal materials that are not convenient to transport through the metal. The shears of the machine work by squeezing each other.
The large metal shredder not only improves the production capacity and crushing efficiency, but also expands the scope of application. The large metal shredder produced by our company is an advanced fine crushing machine. This series of large metal shredder products absorb a variety of Based on the advantages of the crusher, it has been carefully developed using the theories of impact, shear, mutual impact, and grinding. After years of research, Peng Rui's large-scale metal shredder equipment has surpassed the same industry.
Metal shredders can mainly shred hard metal materials such as colored steel tiles, oil drums, paint buckets, automobile shells, motorcycle engine shells, automotive oil filters, etc. Metal shredders can also shred automobile tires and large PE pipes Shredding and shredding is a versatile metal shredding and shredding machine.
The metal shredder is composed of a motor, a hard toothed surface reducer, a rotating knife shaft, an imported moving knife, a fixed knife, a frame, a machine base, a box, a working platform and the like. A fixed knife is installed on the frame of the double-shaft metal shredder, and a detachable embedded movable knife is installed on the rotary knife shaft. The number of the movable knife is determined by different models and the size of the rotary knife shaft. Knife, remove and replace the angle after blunt, until the blunt is used on all sides, then sharpen the knife, because it is a claw type moving knife, rotary cutting, and the fixed knife and moving knife are imported SKD11 material, the hardness after heat treatment reaches HRC60 ° or more Therefore, it has a long service life, strong cutting capacity, and high production capacity. Sharpening is only required for normal use of more than 1,000 tons. The dual-axis metal shredder adopts PLC programmable control, which has a high degree of automation and is easy to operate.
|model||Spindle power (kw)||Spindle speed (r / min)|| Output (t / h) ||Conveyor power (kw)||Number of cutter heads (piece)|| Cutter diameter (mm) ||Crushing size (cm)|| Silo size (mm) ||Length, width and height (m)|| Weight (T) |
| RD-600 || 4-15 * 2 || 18-20 ||2-5|| 4-3 ||26||Φ260||3-10|| 0.82 * 0.9 ||2.6 * 2 * 1.9||2.5|
|RD-1000||4-30 * 2||18-20||5-10||4-3||30||Φ360||3-10|| 1.2 * 1 ||3 * 2 * 1.9||5|
|RD-1200||4-37 * 2||18-20||6-15||4-3||28||Φ372||3-10||1.4 * 1||3.2 * 2 * 1.9||6|
|RD-1500||4-45 * 2|| 14-16 ||8-18||no||30||Φ530||3-10|| 2 * 2 || 4 * 1.7 * 2.4 ||12|
|RD-1900||4-90 * 2||14-16||10-25||no||40||Φ560||3-10||2.3 * 2||8 * 2.5 * 2.4||15|
|RD-2600||4-160 * 2||16-18|| 25-60 ||no||40||Φ720||3-10||2.5 * 1.4||8.2 * 4 * 4.3|| 36 |
The main feature of diesel drum chipper cutting is to drive the whole with diesel ...
Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred ...
Metal shredder is divided into two shafts metal shredder, single shaft metal shredder, gold ...