Shredder is also a kind of crusher. According to the number of shafts, the equipment can be divided into: two-shaft shredder, three-shaft shredder, and four-shaft shredder.
Scope of application:
When the shredder equipment is working, the material can be fully and effectively finely crushed in the crushing cavity, with high output, low energy consumption, high efficiency, and uniform fine crushing. When using this equipment, the noise is low, no pollution, and operation Simple and easy to maintain. This machine is mainly used for shredding of waste materials such as tires, wood, plastics, tires, and metals.
Features and technical advantages:
1. Geared motor drive.
2. Engaged blades will break the cans completely.
3.Select special blade, the hardness of the blade is not lower than HRC55 (the HRC hardness of the file is 51 degrees)
4.Strong structure, densely reinforced ribs to ensure the strength of the box.
5.Automatic button control, safe and convenient.
6. Safety identification and safety labels to ensure safe use.
7. Can be equipped with conveyor belt feeding.
Shredder use and maintenance instructions:
1 Before starting the test run, strictly check whether the installation of each part of the machine meets the requirements, whether the screws and bolts are loose, and you can use the hand to gently pull the belt to test the rotation, and whether there is any shell collision. At the same time check the direction of rotation, it is strictly prohibited to smash flammable and explosive items to avoid accidents.
2 In the production, uniform cutting should be maintained to ensure the shred quality and normal production. At the same time, overloading of the motor is strictly prohibited to ensure the normal operation of the machine.
3 In addition to paying attention to checking the looseness of various parts, it is also necessary to pay attention to checking the wear of the wearing parts. If the wear is severe, it should be replaced in time to avoid damage to the main parts. And take necessary fire prevention measures.
|model||Tool specifications (diameter * thickness )||power||Number of tools||Reducer||Yield (woven bag)||Dimensions|
|600 type||200 * 20mm||15kw||24||350 type||0.5t / h||1.45 * 0.87 * 2.2m|
|800 type||200 * 20mm||15kw * 2||32||350 * 2 units||0.9t / h||2.15 * 0.87 * 2.2m|
|900 type||300 * 30mm||30kw * 2||18||500 * 2||4t / h||3.4 * 1.2 * 2.2m|
|1000 type||300 * 30mm||30kw * 2||27||650 * 2 units||4.5t / h||3.4 * 1.25 * 2.2m|
|1000 type||400 * 40mm||30kw * 2||20||650 * 2 units||4.5t / h||3.4 * 1.25 * 2.2m|
|1500||300 * 30mm||55kw * 2||48||750 * 2 units||6t / h||4.15 * 1.25 * 2.2m|
|1500||400 * 40mm||55kw * 2||36||750 * 2 units||6t / h||4.15 * 1.25 * 2.2m|
Large scale and strong company
The company is large and strong
Technology, advanced equipment
The leading technology; advanced equipment
A good after-sales service
Perfect after-sales service
Changchun plastic crusher case
Plastic crusher is used to crush waste plastic and factory plastic scrap. Plastic crushers are widely used in the recycling of waste plastics and the recycling of scraps from factories. The motor power of the plastic crusher is between 3.5 and 150 kilowatts, and the speed of the knife roller is generally between 150 and 5 ...
Fujian Woven Bag Crusher Case
The woven bag crusher is a special equipment for crushing soft waste plastic products such as plastic films and woven bags. The equipment has the characteristics of reasonable structure, high production efficiency, long service life, and never entangles the waste silk and waste film. Different sizes can be obtained through reasonable replacement of the screen ...
Gansu Shredder Customer Case
Shredder is a kind of machine used for fine crushing. It is generally used to process raw materials or scraps to make them smaller. A typical example is to shred plastic or rubber scraps as raw materials and then pelletize them to remake plastic bottles ...
Shanghai Plastic Shredder Case
Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred high-density polyethylene HDPE plastic products and materials, which is beneficial to plastic recycling and recycled plastic particles. Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment for shredding high ...
Zhengzhou Pengrui Machinery Equipment Co., Ltd. is a large and medium-sized heavy industry machinery manufacturing company integrating R & D, manufacturing and sales. Since its inception, it has established a good corporate image in the market by using scientific modern enterprise management methods and excellent product quality and perfect after-sales service.
The company's products include shredder series, metal shredder, plastic shredder, scrap steel shredder, plastic shredder, woven bag shredder, twin shaft shredder, etc., baler series, drum chipper, template Crusher equipment, etc. After years of development, Pengrui has formed a chain supply of production lines, ranging from mainframe equipment to small supporting equipment and accessories. It is widely used in mining, metallurgy, building materials, construction, metal packaging and other industries. The company regards product quality as its life. The main parts and wearing parts are made of high-quality wear-resistant materials and advanced processing technology, making the equipment durable. The company has advanced production equipment and sophisticated testing instruments. Each link of the product undergoes rigorous testing to ensure that the product reaches a higher standard when it leaves the factory, and provides a strong technical guarantee for product development, update, and improvement.