Scrap crusher is a kind of crushing equipment for processing scrap steel. It is mainly used for crushing scrapped cars, scrapped household appliances and light and thin scrap. The crushed material obtained through the treatment of the scrap steel crusher has high density, high purity, and basically no impurities. When manufacturing companies such as steel mills use the crushed material to remelt into new products, the unit energy consumption is low, the output is high, and the comprehensive economy is obvious. Scrap crusher is recognized as the ideal equipment for processing scrap.
The entire production line consists of feed conveyor-main machine-discharge conveyor-magnetic separation conveyor-dividing conveyor-dust removal-operation cabinet. The crushed materials from the scrap steel crusher are separated by ferrous metal objects, non-ferrous metal objects and non-metallic objects through vibrating conveyors, belt conveyors, and magnetic sorting systems, and are sent to the piles by their respective conveyors. Non-ferrous metals and non-metallic objects will be searched by magnetic separation equipment again on the conveyor to sort out free ferrous metal objects, thereby improving the recovery rate of ferrous metal objects. At the same time, by manually selecting non-ferrous metals, the recycling efficiency can be improved. The whole crushing line is controlled by upper computer and controlled by PLC, which can realize microcomputer control and manual operation.
Ultra-high crushing efficiency
The use of hydraulic feeding and hammer and ring hammer combined crushing heads can improve the efficiency of other crushers by 5% -15%.
The unique roller kneading process is used to significantly remove dirt such as paint and form high-density pellet-shaped materials, which can increase the value by more than 30.
Stable operating capability
A safety door is provided. After the unbreakable objects enter the crushing chamber, the operator can open the safety door and discharge it out of the machine body to avoid damaging the crusher.
Advanced control system
The PLC control system and hydraulic power system save time and effort in intelligent production, and realize stable, automatic and safe operation of the complete production line.
Uses: Scrap steel crusher, used to process scrap car body, tinplate, old appliances, bicycles, empty cans and other inferior waste materials to make it into the upper raw material. Through the continuous crushing of the machine, removing the coating film, increasing the volume specific gravity, preventing explosion when the electric furnace is put into operation, and improving the dissolution rate under a certain state, etc., to meet the requirements of the steel plant "fine material into the furnace".
This machine can be used to crush:
① The entire body or the car is flattened (excluding tires, gasoline, cylinders, engines and gearboxes)
③Household appliances (excluding motors, compressors and shafts)
④ Bicycle body and similar materials
⑤Empty tank (remove liquid, paint, etc.)
⑥Other suitable materials for crushing
The main feature of diesel drum chipper cutting is to drive the whole with diesel ...
Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred ...
Metal shredder is divided into two shafts metal shredder, single shaft metal shredder, gold ...