Plastic crusher is a kind of solid waste reduction machinery environmental protection crusher equipment. It is used to crush high density polyethylene HDPE plastic products and materials, which is beneficial to plastic reuse and regeneration of plastic particles. For example: mineral water bottles, PET bottles, motor oil bottles, gasoline bottles, plastic buckets, waste household appliances, used children's cars, etc.
1. Plastic crusher consists of four parts: crushing mechanism, support, recovery box and trolley.
2. The plastic crusher is designed with a filter screen device. When the plastic crusher works normally, the filter screen plays a role in separating materials and liquids, effectively recycling the liquid remaining on the bottle.
3, the size of the material can be adjusted according to the screen aperture.
Energy efficient, durable
This equipment optimizes the production process of traditional pulverizers, improves the working efficiency of the equipment, greatly reduces the workload of power consumption, and is economical and environmentally friendly. Compared with ordinary ball mills, the power of the original motor is reduced, the installed capacity is reduced, thereby improving the working efficiency and reducing the loss.
Long life with rolling bearings
The use of rolling bearings not only has a large bearing capacity, but also has a long service life, which is more than 5% higher than the sliding bearing life, reducing the problem of shutdown due to the high temperature of the sliding bearings. This extends the life of the equipment.
Easy lubrication and easy maintenance
The main bearing is lubricated with grease, which is easy to use and clean, thereby eliminating heavy metal pollution. Therefore, there is no need to do too much maintenance, as long as the maintenance is usually performed, which greatly reduces the maintenance costs.
The central control shaft is made of cast steel with good wear resistance
The hollow shaft is made of cast steel, the inner lining can be replaced, and the rotary gear is processed by casting hobbing. Moreover, a wear-resistant lining plate is inlaid in the cylinder, which has good wear resistance.
|model||Spindle power (kw)||Spindle speed (r / min)|| Output (t / h) ||Conveyor power (kw)||Number of cutter heads (piece)|| Cutter diameter (mm) ||Crushing size (cm)|| Silo size (mm) ||Length, width and height (m)|| Weight (T) |
| RD-600 || 4-15 * 2 || 18-20 ||2-5|| 4-3 ||26||Φ260||3-10|| 0.82 * 0.9 ||2.6 * 2 * 1.9||2.5|
|RD-1000||4-30 * 2||18-20||5-10||4-3||30||Φ360||3-10|| 1.2 * 1 ||3 * 2 * 1.9||5|
|RD-1200||4-37 * 2||18-20||6-15||4-3||28||Φ372||3-10||1.4 * 1||3.2 * 2 * 1.9||6|
|RD-1500||4-45 * 2|| 14-16 ||8-18||no||30||Φ530||3-10|| 2 * 2 || 4 * 1.7 * 2.4 ||12|
|RD-1900||4-90 * 2||14-16||10-25||no||40||Φ560||3-10||2.3 * 2||8 * 2.5 * 2.4||15|
|RD-2600||4-160 * 2||16-18|| 25-60 ||no||40||Φ720||3-10||2.5 * 1.4||8.2 * 4 * 4.3||36|
The main feature of diesel drum chipper cutting is to drive the whole with diesel ...
Plastic shredder is a kind of solid waste reduction machinery environmental protection shredder equipment, used to shred ...
Metal shredder is divided into two shafts metal shredder, single shaft metal shredder, gold ...